The load-bearing capacity of aluminum alloy toolbox is particularly strong, with boxes of the same weight or volume being 5-8 times larger than other boxes. More and more customers are choosing aluminum alloy boxes as the outer packaging boxes of their products, and the market share of aluminum alloy boxes is also increasing. But for aluminum alloy boxes, the weight of the box is directly proportional to the weight of the products inside. The heavier the product, the stronger the load-bearing capacity of the box. The thicker the plates, aluminum profiles, etc. used, the weight naturally increases.
The aluminum alloy toolbox is made of aluminum alloy profiles with an aluminum frame, which is composed of many accessories, including corners, notches, profiles, handles, wheels, and other accessories. The important plates and aluminum profiles of the box can be made of materials provided by the supplier, and with the same support strength, the weight will be reduced. Seeking new technological products without affecting the quality of aluminum alloy boxes.
Starting from the aspects of pull rods, wheels, rivets, hardware accessories, etc., communicating with suppliers, making samples, and using composite materials for accessories to reduce the overall weight of the box. It is recommended to dust and clean the aluminum alloy box before storing leather products every time. General leather products are first coated with leather care oil. First, apply the oil to a clean cotton cloth, aluminum alloy box, and then evenly wipe the surface to avoid directly applying oil to the surface to avoid damaging the leather.
The cabinet for storing leather products in the aluminum alloy toolbox must be kept ventilated. The natural grease in the leather itself will gradually decrease over time or with excessive use. Therefore, even good leather products need regular maintenance. Aluminum alloy toolbox leather has strong absorption, and attention should be paid to anti fouling, especially for high-end sanded leather. Once a week, soak in water with a dry towel and wring it dry. Repeat several times for a light wipe.
If there are any holes or burning damage found in the aluminum alloy box, do not repair it without authorization. Please directly seek professional service. The hardware maintenance on the aluminum alloy box should be wiped with a dry cloth after use. If there is slight oxidation, you can try lightly rubbing the hardware with flour or toothpaste.
